Skip to content

Coiled Garden Hose – Best Price!

The Ultimate Shopper's Guide to Coiled Garden Hoses

Archive

Tag: air

First off sorry about such a long video, I wanted to get as much info as I could into it. If anyone watching has any further questions, comment or send me a message and I’ll be glad to help. That being said, a couple of extra things: 1) OBEY THE LAW!!!! If you use the info in this video to mount a horn on your car, you do so at your own risk. I cannot and will not be held responsible for the misuse of any information in this video. 2) Valves. Though it is the best, a gram white valve isn’t necessary. You can run a horn off a ball valve or (god forbid) a solenoid. The GW is just more fun and accurate. 3) Hoses. The red hose you see is a Goodyear 200 PSI rated hose that I bought by the foot at a hardware store. If you do go this route and use garden hose connectors, I would suggest gettign 3/4 inch hose. Reason being is that the 3/4″ hose barbs are 1/2″ internal, where as the 1/2″ hose barbs on that red hose are 1/4″ inside, hence why it’s the tank to tank hose. In a horn air set up, the less restrictions the better! The yellow hose is a self coiling 1/2″ air hose that was special ordered. 4) Pressure! I mentioned this in the video, but didn’t explain. Locomotives operate with 140 PSI in the main reservoir. All horns designed for railroad service are rated to at least this, most are rated to 150. For hobby use though, I strongly recommend 90-100, never over 120. Over 100, the horn(s) don’t sound any louder, but they do sound a lot harsher. Just listen to any BNSF dash 9

SGI® ICE® Cube Air offers a complete solution, starting at 000 and operational in hours. The new ICE Cube Air MDC expands in standard increments out to 80 racks/97920 cores/143.36 PB. With highly efficient fans, along with an innovative three-stage evaporative cooling system, ICE Cube Air runs with air and evaporative cooling, achieving a power usage effectiveness (PUE) ratio of less than 1.06. Supplemental direct expansion (DX), or chilled water cooling coils, provides an optional cooling system for customers deploying in extreme environments. Using one percent of the water needed by standard water-chilled containers and requiring a water flow of only two gallons per minute, ICE Cube Air can get its water from almost any clean source, including a garden hose. www.sgi.com/icecubeair.

SGI® ICE® Cube Air offers a complete solution, starting at 000 and operational in hours. The new ICE Cube Air MDC expands in standard increments out to 80 racks/97920 cores/143.36 PB. With highly efficient fans, along with an innovative three-stage evaporative cooling system, ICE Cube Air runs with air and evaporative cooling, achieving a power usage effectiveness (PUE) ratio of less than 1.06. Supplemental direct expansion (DX), or chilled water cooling coils, provides an optional cooling system for customers deploying in extreme environments. Using one percent of the water needed by standard water-chilled containers and requiring a water flow of only two gallons per minute, ICE Cube Air can get its water from almost any clean source, including a garden hose. www.sgi.com/icecubeair.

SGI® ICE® Cube Air offers a complete solution, starting at 000 and operational in hours. The new ICE Cube Air MDC expands in standard increments out to 80 racks/97920 cores/143.36 PB. With highly efficient fans, along with an innovative three-stage evaporative cooling system, ICE Cube Air runs with air and evaporative cooling, achieving a power usage effectiveness (PUE) ratio of less than 1.06. Supplemental direct expansion (DX), or chilled water cooling coils, provides an optional cooling system for customers deploying in extreme environments. Using one percent of the water needed by standard water-chilled containers and requiring a water flow of only two gallons per minute, ICE Cube Air can get its water from almost any clean source, including a garden hose. www.sgi.com/icecubeair.

SGI® ICE® Cube Air offers a complete solution, starting at 000 and operational in hours. The new ICE Cube Air MDC expands in standard increments out to 80 racks/97920 cores/143.36 PB. With highly efficient fans, along with an innovative three-stage evaporative cooling system, ICE Cube Air runs with air and evaporative cooling, achieving a power usage effectiveness (PUE) ratio of less than 1.06. Supplemental direct expansion (DX), or chilled water cooling coils, provides an optional cooling system for customers deploying in extreme environments. Using one percent of the water needed by standard water-chilled containers and requiring a water flow of only two gallons per minute, ICE Cube Air can get its water from almost any clean source, including a garden hose. www.sgi.com/icecubeair.

My uber tiny coil. I thought, “I wonder how small I can get a sgtc (spark gap tesla coil) to efficiently work.” So I went to work. The coil form is a 4″ section of that cardboard clotheshanger stuff (.5″ diameter) wrapped with super thin, around 36 awg, magnet wire I got out of one of those small DC motors. The primary is 18 awg insulated wire wrapped 18.9 turns around a piece of garden hose that I slipped over the secondary, which by the way is stood up by a picolo pete base. I’ve been looking around and I think so far, its one of the smallest working sg tesla coil in the US maybe even the world. Please don’t try to beat my record :D jk

Powered by Yahoo! Answers